black textured enamel finish - furniture quality - click to enlarge
for wide LCD - TVs single shelf with extra base
for wide LCD - TVs two shelf with divider
bench type for elevation
48" stand with top swivel
| HOME | SHIPPING & RETURNS | PAYMENT | ABOUT US | TESTIMONIALS |
|
black textured enamel finish - furniture quality - click to enlarge
for wide LCD - TVs single shelf with extra base
for wide LCD - TVs two shelf with divider
bench type for elevation
48" stand with top swivel
|
multiple stock sizes from $33
Larger custom single shelf models are usually between $50 and $150 including those with an extra base. Double shelf models can be from $70 to $280. Bare wood models suitable for painting are less.
If you would like a price quote for a custom made swivel or stand please let me know the following:
What type of TV do you have and what is the screen size? Tube TV, LCD TV, plasma TV, or projection TV, DLP?
What size top piece do you require? This depends of the base of your TV or the feet of it, whatever sits on the furniture. This is usually much smaller than the overall size of the TV. Most special orders are for rectangular top shelves suitable for LCD and plasma TVs. If you have a large tube TV which is narrower in the rear and want the back corners cut off for swiveling in a smaller space please let me know.
If you want to two tier model, what size space do you need for the compartment below the TV, height, width and depth? If you want to have multiple components, you can either have them side by side or stacked. If side by side please let me know the measurements of both components and if you want a divider between them. Usually with very wide units a divider is necessary for support of the top shelf. The right and left position of the divider can be adjusted later with a drill and screwdriver if necessary for different sized components. For units with swivels, the component compartment is limited to 6 inches in height.
Do you need your stand to swivel? If you don't need it to swivel this will make it less expensive. If your TV is wider than 30 inches and you want a swivel do you prefer an extra base attached to the bottom for stability which is the same size and material as the top piece (stops will be installed to limit the amount of swivel) or would you prefer to attach the unit to the furniture with four screws? (the cheaper option) If your TV screen is less than about 30 inches you may not necessarily need either of these. See "IMPORTANT SAFETY INFORMATION" below.
Do you want black enamel or unfinished wood suitable for painting?
It usually takes 5 to 10 days to complete a special order (less if bare unfinished wood) and about 3 days to reach you by UPS.
If you don't know exactly what you want just email me at gregwww@bestvaluetvswivels.com with your needs and I will follow up with suggestions. Thank you for your interest.IMPORTANT SAFETY INFORMATION: With larger TVs it is necessary for safety either to order a swivel with an extra base of the same material and finish attached to the bottom for stability or to attach the unit with screws to the furniture. Attachments can easily be done with just a screwdriver working from the top through a single access hole which I can drill in the wood of the swivel and which should be hidden by the TV or component. These units can swivel 360 degrees. If attachment is not possible an extra base for stability should be ordered and there will be stops which limit amount of swivel. These stops should not be removed unless a qualified installer attaches the base to the furniture or some other measure of preventing the TV from falling is employed such as securing the TV to the wall with cables. Installation should be done by someone qualified to make sure it is safe. Please read the additional safety information for more details.
Note: special orders are not returnable unless defective.